Posted tagged ‘Pilchuck Glass School’

Sculpture Adventure in Washington – May/June 2013

August 9, 2013

It’s been a while since I last posted photos of my sculptures. Well, I haven’t been sitting on my hands, actually I’ve been quite busy, making some sculptures in Corten Steel while visiting Bill Wentworth, Sterling Designs in Poulsbo, WA. Bill and I worked on my Wholeness sculpture pictured below and got my YinYang Block started. I got to finish it once returning to CA. (See image in next posting)

Bill lives near my studio and I’ve needed to get up to WA and clean out some of my stone collection. After 20 years of collecting stones for sculpting and having moved to southern CA, I needed to lighten my load and share some of these gems with fellow stone sculptors. So Rick, Sharon, Chuck, and Steve came out and drove away with 5 or 6 tons. That helped me pay for my travels and lighten my load at the same time. I also received a half scholarship to the Pilchuck Glass School for a short program with Richard Whiteley and Scott Chaseling. These two Ausies are great in their field, Richard a master at glass casting, and Scott a master at blown glass. They called their class Fractures, and given the minimal time we had to complete three casting/blown/cold worked glass sculptures, their namesake was appropriate. I was fortunate to not have any of my glass pieces fracture, but some did. This was not for the weak of spirit, this class took passion and long days and nights, prepping our ideas to begin each day until we could get work into the kilns for annealing or getting them cold worked and ready for the next steps needed. I again felt like one of the elder students on campus, so I pushed myself to finish my projects ahead of the curve. This was my strategy for not falling behind and putting more stress on the work than I would be OK with. So I put the pedal down and got my three projects done in the 8 days we had to work.

After Pilchuck I returned to Bainbridge Island and completed my projects, rented a Uhaul trailer and headed back home to Ojai. I had a safe journey and next installment I’ll show you the sculptures I finished since returning to Ojai.

 

Click on any photo to see it in a larger format. Please don’t hesitate to ask questions or leave comments below. ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage

Advertisements

Getting Back to Sculpting

November 23, 2009

After my inspirational days at Pilchuck, I began a remodel of my studio space. Over the past 18 years, I have mostly worked outdoors under a roof but without walls. This is invaluable for the heavy removal of stone material which generates large amounts of dust. During the winter months, I would be tempered by the weather and this winter I wanted to work on glass and stone sculptures without the concerns of the weather conditions. This would require building walls, and plumbing the studio with hot water for the wet polishing that I do. Besides enclosing my studio, having warm water is one of the most important improvements I have made in my new studio space.

Well, I thought it would take a few weeks with some hired help to get the studio in shape. Well, three months later I finally called it quits, knowing that I could continue improving the workspace and building some new tools and work benches. Little did I know how important getting back to sculpting would be for me. When the sculptures I had in mind began to take shape, I became a nicer person. I felt like I had been carrying them inside and they needed to come out, and like the birthing process, I wasn’t the most pleasant person to be around. Yet once they took form, I was much more at peace, and even friendlier. Here is a photo album you can view the transformation of my outdoor studio:

http://picasaweb.google.com/blb4peace/StudioRemodel?feat=directlink

As I had a couple of exhibitions and some shows to apply for I needed to get back to sculpting. I have been carrying ideas from Pilchuck Glass School days inside of me, and waiting to get them started. As my shows approached, I needed to work quickly to get some sculptures completed and cast glass sculptures are not quick to make. Casting glass is the most indirect sculpting I do. Imagine making a sculpture in clay or wax, and then making a rubber mold with a plaster mother mold, then making a wax of the sculpture which needs to be worked to the look I want, then making an investment mold in preparation for the glass casting stage. Then the wax is steamed out of the mold and the mold is then dried. This stage is the most critical in prepping for the glass to melt into the mold. Now the part that’s really slow, bringing the mold and the glass up to melting temperature, soaking it to allow the bubbles to rise, then cooling it ever so slowly to relieve the stresses in the glass, when it reaches room temperature, it is best to leave it in the unopened kiln for an additional day. The the devesting of the mold is the exciting part, where the quality of the  casting is realized. If it is a good casting then the cold working and polishing of the glass sculpture begins. If the casting is not good, then you go back to the making of the wax and start the process over. This is why many people don’t cast glass, as it’s such a slow indirect method of sculpting.  So I worked on stone sculptures, as I only had 6 weeks before the exhibition.

So I let my imagination open to work with my signature stone, an Onyx that is a beautiful orange/yellow calcite. And a new series began to be birthed. Bringing sculptures of light into this world is a great joy. See posted photos of the new work.

Soon I will begin preparation for glass castings. I will post some photos soon to show you the direction I am taking with the same theme of bringing light into this world.

Wishing you readers the best for the upcoming holidays. I am thankful of all the support I have received this year and throughout my life. Your comments are welcomed. Brian